These products are manufactured mostly from SAE 1010 cold rolled tube (diameter 25.4 x2mm), which is precision mandrel bended to exact sizes. Laser cut brackets are welded to manipulated tubes in jigs to give repeatability of product. Our flagship product is the Full Spec Endurance protection bar system (FSE / 3 Part). This system comprises of an upper protection bar and an engine protection bar with an integrated bash plate. You will notice the following form and functions:
Upper protection bars:
This part of the protection bar is for front and side protection. We realize that a snug fit around the upper area (traditional tank area), might look neater, but this does not give adequate protection for your legs, the radiator and the tank area. Access to the tank panels becomes problematic with the snug fit. The wider wing also creates the necessary lift of the motorcycle when it lands on its side in order for the handle bars to move freely without any damage. This is not always possible, as in the case of the KTM690R.
Engine protection bars:
These bars are mounted to the frame of the motorcycle as far as possible and as little as possible to the engine. This gives adequate protection for oil filters, side covers, water pumps, gear levers, foot brakes, side stands etc. The original ground clearance is maintained.
The 4.5 mm aluminum bash plate is mounted to the engine protection bars and not directly to the engine. This gives protection of the lower parts of the engine and the exhaust system. Traditionally, bash plates are mounted directly to the engine, whereby engine damage can still occur as mounting points takes the brunt of the impact. With the integrated Rumbux protection bar, this is not the case.
Designed with the following in mind:
- Follow the styling of the motorcycle, to give you a nice looking product.
- Easy access of motorcycle components.
- Easy fitment and removal of systems.
- Adequate protection of the motorcycle.
- Adequate protection for the rider.
The protection bar, carrier & bash plates coatings is as follows:
- Specialized cleaning of the finished product.
- Zinc phosphate plating.
- E -Coat.
- Powder coat.